1/32 TNS Cylon Centurions (Poseable)

marcnoonan · Post by **marcnoonan** » Thu Jan 25, 2018 12:35 pm

Hi All,

These have been made to be printed in Shapeways FXD and the print cost for the 3 Centurions is roughly $38.

I'm opening these up to a group buy to reduce the overall price and return funds to the person who commissioned it. If you're interested in a copy of the mesh please add your interest below and send me a PM for further details. The overall cost is £150 which will be evenly split, so the more the merrier, and cheaper and 2 spots have been taken. So 1 more people will reduce the price to £50 each, 2 more people to £40 each and 3 more to £30 each etc.

1/32 poseable Razor Cylons will be next.

https://www.shapeways.com/model/3dtools ... b912f28aac

Want some?

Marc

marcnoonan · Post by **marcnoonan** » Fri Jan 26, 2018 5:48 pm

Thanks for the share Koba,

The client actually had me over-thicken all the parts up to 1mm when 0.6mm would have fine and therefore I could scale it down to 1/52 for you and it would still print perfectly in FXD, although be fiddly to put together, but there's a one piece version too. The only alteration I would need to make is thickening up the fingers.

https://www.shapeways.com/model/3dtools ... 24777c1b86

Although this started as a hobby, it's now a full-time job with a long waiting list and as such I sadly just don't do models for myself anymore, even though I have a massive stash of ships I want to print for myself. I now generally only do what I'm commissioned to do so if someone asks for Borg, I'll give you a shout.

Cheers

Marc