Enterprise D Saucer Deflector

The place for all things related to the "sacred scale".
Post Reply
marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 343
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England

Enterprise D Saucer Deflector

Post by marcnoonan »

Hi Peeps,

I was given a rough sketch and asked to add a saucer deflector to the Ent-D, after a lot of trial, resulting in mostly error.

https://www.shapeways.com/model/3dtools ... e8ae378232
Deflector Overlay.jpg
Extras 4.jpg
Extras 4.jpg (75.8 KiB) Viewed 1904 times
Iteration l.jpg
Iteration l.jpg (77.64 KiB) Viewed 1904 times
Whatcha think?

Cheers

Marc
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.
User avatar
Tesral
Administrator
Administrator
Posts: 4937
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: Enterprise D Saucer Deflector

Post by Tesral »

Interesting. You went add on instead of bury. It would make putting it on easier.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
NoKhando
Lemme At Em Lieutenant
Lemme At Em Lieutenant
Posts: 93
Joined: Wed May 11, 2016 1:34 pm
Location: In the land of the Bombley Boo

Re: Enterprise D Saucer Deflector

Post by NoKhando »

I think it's buried .

You can see the edge of the hull . Quite an optical illusion though .

Very nice btw .
User avatar
Vahmp
Charismatic Commander
Charismatic Commander
Posts: 343
Joined: Mon Apr 29, 2013 10:41 pm
Location: Sao Paulo, Brasil

Re: Enterprise D Saucer Deflector

Post by Vahmp »

Kool!
So.... What ship class will this one be?
The ship doesn't have a Secondary hull?
Laterz...
Vahmp
marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 343
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England

Re: Enterprise D Saucer Deflector

Post by marcnoonan »

Yep,

It's fully recessed into the hull, the 3D Shapeways link shows it off better, along with the Aeroshuttle swap and I think it should be the Enterprise "Double D"....having 2 deflectors of course 8-)

Here's the rest, or one of the 4 variants I've done anyway.

https://www.shapeways.com/model/3dtools ... c505c1e4d1

Marc
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.
marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 343
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England

Re: Enterprise D Saucer Deflector

Post by marcnoonan »

Thanks guys,

IOther swaps were the Voyager lifeboats, Voyager RCS thrusters and the Aeroshuttle and you'll be happy to hear Koba that I'll be giving this the fully detailed treatment in the near future.
Proto.jpg
Proto.jpg (50.68 KiB) Viewed 1835 times
Proto 2.jpg
Proto 2.jpg (49.06 KiB) Viewed 1835 times
and these 8-)
Odysseys.jpg
Odysseys.jpg (75.2 KiB) Viewed 1835 times
Odysseys 2.jpg
Odysseys 2.jpg (100.04 KiB) Viewed 1835 times
Odyssey.jpg
Odyssey.jpg (58.14 KiB) Viewed 1835 times
Odyssey 6.jpg
Odyssey 6.jpg (69.89 KiB) Viewed 1835 times
Odyssey 5.jpg
Odyssey 5.jpg (65.33 KiB) Viewed 1835 times
Odyssey 4.jpg
Odyssey 4.jpg (71.82 KiB) Viewed 1835 times
Odyssey 3.jpg
Odyssey 3.jpg (89.17 KiB) Viewed 1835 times
Odyssey 1.jpg
Odyssey 1.jpg (76.32 KiB) Viewed 1835 times
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.
User avatar
Tesral
Administrator
Administrator
Posts: 4937
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: Enterprise D Saucer Deflector

Post by Tesral »

The sub ship, is that about defiant sized? I like it.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 343
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England

Re: Enterprise D Saucer Deflector

Post by marcnoonan »

It's an Aquarius-class escort ship and if USS Odyssey is 1062m then it's just shy of the Defiant size at 118.16m.,,,if you like the 120m version.

Works perfectly in 2500 :mrgreen:

https://www.shapeways.com/model/3dtools ... 8d534960b7
Aquarius.jpg
Aquarius.jpg (71.81 KiB) Viewed 1823 times
Aquarius 2.jpg
Aquarius 2.jpg (68.38 KiB) Viewed 1823 times
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.
User avatar
RogueWolf
Velutinous Vice Admiral
Velutinous Vice Admiral
Posts: 2872
Joined: Sun Sep 30, 2012 3:49 pm
Location: NL, Canada

Re: Enterprise D Saucer Deflector

Post by RogueWolf »

Cool stuff!
Check out my NorthTrek Creations kits at:
http://www.mvmodels.biz/northtrek.asp
Valar Morghulis
Post Reply

Return to “1/2500”