Topic: https://www.allscaletrek.com/viewtopic.p ... rprise,TOS Enterprise NCC-1701 Modified
Subject: 1/1350 scale by Polar Lights. This is the production version. I added additional LED's to the shuttlebay and bridge dome. I also customized the bussard dome lights. The model was built using photo-etch brass set by Paragrafix and vinyl paint masks by Orbital Drydock.
This photo was taken in my garage against a "space" backdrop.
GID: TRKG1S1P1
Left click once on the image to expand.
Last edited by trekriffic on Tue Feb 06, 2018 11:54 pm, edited 14 times in total.
Topic: https://www.allscaletrek.com/viewtopic.p ... 05,Klingon D7 Modified
Subject: 1/650 (?) scale by Polar Lights. Reissue of original Klingon battlecruiser model kit with new dome stand.
Nacelles were modified at the rear to make them 1/4" longer.
GID: TRKG1S2P2
Left click once on the image to expand.
IMG_3910.JPG (116.86 KiB) Viewed 1778 times
Last edited by trekriffic on Tue Feb 06, 2018 11:54 pm, edited 2 times in total.
Topic: https://www.allscaletrek.com/viewtopic.p ... #p2091,TOS Romulan Bird-of-Prey Modified
Subject: 1/1350 (?) scale by Polar Lights. Extensive modifications were made to the shape of the hull and angle and shape of the wings and tailfin. Window ports were drilled out and fitted with frames using brass tubing. A custom LED lighting system was installed. Two shuttle bays added- one holds a small "Talon" fighter craft, the other functions as an onboard battery compartment for "untethered" illumination. A mirrored display base (with nameplate) and power jack for external battery box connection finished off the project which took almost a year to complete.
GID: TRKG1S3P3
Left click once on the image to expand.
Last edited by trekriffic on Tue Feb 06, 2018 11:54 pm, edited 4 times in total.
Topic: https://www.allscaletrek.com/viewtopic.p ... ny+Bay,TOS Botany Bay Modified
Subject: 1/1350 scale by Fantastic Plastic. Resin kit with brass tubing added internally for joint strength, scratch made brass and plastic aft "radiator" panels, other more minor modifications made for studio model accuracy. The model was heavily "aged", primarily using Tamiya pastel chalks, with care taken to duplicate the pattern of "space weathering" seen on the original studio model. Extensive use was made of online photo references during the course of construction and painting.
GID: TRKG1S4P4
Left click once on the image to expand.
IMG_5866.JPG (80.87 KiB) Viewed 1772 times
Last edited by trekriffic on Tue Feb 06, 2018 11:54 pm, edited 2 times in total.
Topic: https://www.allscaletrek.com/viewtopic.p ... ey,Klingon Bird-of-Prey Modified
Subject: 1/1350 (?) scale by AMT/Ertl. Winner of the 2014 AST "Make It So" model contest. Model features a custom LED lighting system with fiber optic strands to light the wing-mounted disruptor cannons. An aftermarket sliding hinge kit allows for positioning of the wings in landing, cruising, and attack modes. Stern warp/impulse engines are fully lit with a red "flickering" effect achieved using LEDs pirated from votive candles purchased at my local craft store.
GID: TRKG1S5P5
Left click once on the image to expand.
Last edited by trekriffic on Tue Feb 06, 2018 11:54 pm, edited 1 time in total.
Topic: https://www.allscaletrek.com/viewtopic.p ... ga,Klingon K't'inga
Subject: 1/537 (?) scale by AMT/Ertl. Model was built several years ago with a Motion Picture style paint scheme. This was an out-of-the box build (yes, you heard right) with no alterations to the kit.
GID: TRKG1S6P6
Left click once on the image to expand.
Last edited by trekriffic on Tue Feb 06, 2018 11:55 pm, edited 1 time in total.
Topic: https://www.allscaletrek.com/viewtopic.php?f=7&t=90,TOS Production Enterprise Modified
Subject: 1/1000 scale by Polar Lights. I added an LED behind each bussard dome which I tinted orange on the inside. Also added a white LED to the saucer to light the upper and lower domes. The LEDs are powered by 4 button batteries providing 6V of DC current. The batteries are housed in a tray attached to the back of the deflector dish housing.
GID: TRKG1S7P7
Topic: https://www.allscaletrek.com/viewtopic.p ... Enterprise NCC-1701 Refit
Subject: 1/1000 scale by Polar Lights. Pretty much an OOB build. The aztec decals were a bear to apply of course.
GID: TRKG1S8P8
Topic: https://www.allscaletrek.com/viewtopic.p ... ey,Romulan Bird-of-Prey Modified
Subject: 1/1000 scale by Polar Lights. Lighting added along with a custom shuttle bay with fighter. Custom made stand.
GID: TRKG1S9P9
Topic: https://www.flickr.com/photos/29607470@ ... 3786,NX-01 Enterprise
Subject: 1/1000 scale by Polar Lights. One of my rare straight out-of-the-box builds. Aztec decals by Justin Leighty.
GID: TRKG1S10P10
