Hello everybody,
I have been told to share my ideas so let´s go :
The Odyssey from Hidden Frontier web serie:
-saucer: I will use an Ambassador class saucer
-bridge: sovereign class bridge/conning with the impulse engines
-secondary hull: galaxy class, I will reduce the height of the neck and extend it forward a little bit.
-warp nacelles : got to find some weapon/fuel tanks from airplanes kits
Bradbury Class:
-saucer: sovereign saucer minus bridge (of course, see above )
-bridge: excelsior/Enterprise B
-secondary hulls: two from excelsior/Enterprise B
-warp nacelles: halves of stabilo boss pens (the ones used in the studio kitbashes)
A design I have seen somewhere on the web, but it has been re-worked since and looks differently now Dawnstar Class Explorer:
-saucer: galaxy
-Hull: ambassador
-warp: If I can get the Cheyenne's ones or, again the stabilo boss pens (bigger but may look better on an ambassador hull)
Border cruiser USS Frontier
-saucer: galaxy but turn by 90°, needs 2 saucers to cut/displace the connecting neck
-warp pylons: need to change fwd to aft (swept the other way)
-warp nacelles: long ones from MMI
All these models will not be accurate reproductions but that's good enough for me
Btw, If some garage makers want to do them in resin .... I will save a lot of time and probably stay sane
Ideas & Projects for Federation Ships
-
- Charismatic Commander
- Posts: 391
- Joined: Sun Jan 31, 2016 10:35 am
- Location: Paris, FRANCE
Ideas & Projects for Federation Ships
dJiPi the froggy
-
- Crafty Commodore
- Posts: 1085
- Joined: Thu Apr 18, 2013 12:47 pm
Re: Ideas & Projects for Federation Ships
Neat! Hope to see some of these kitbashes soon. I think a lot of the GKers are busy with other in-demand projects, but if you bash something up maybe you'll inspire them.
-
- Charismatic Commander
- Posts: 391
- Joined: Sun Jan 31, 2016 10:35 am
- Location: Paris, FRANCE
Re: Ideas & Projects for Federation Ships
Thanks,
Will probably start after my next contract at sea, during summer time, I still need to buy/find some bits.
When started I will post some pics.
Will probably start after my next contract at sea, during summer time, I still need to buy/find some bits.
When started I will post some pics.
dJiPi the froggy
-
- Charismatic Commander
- Posts: 391
- Joined: Sun Jan 31, 2016 10:35 am
- Location: Paris, FRANCE
Re: Ideas & Projects for Federation Ships
I forgot: I have an Eaglemoss Dauntless on his way to my mail'box for an Attack Cruiser:
-saucer: the Dauntless's one
-secondary hull: sovereign
-warp: galaxy but rotated by 90°, warp pylons should be horizontal.
I don't know yet if I can sandwich the secondary hull of the Dauntless between the 2 halves of the sovereign's or If I must cut/saw it off.
Warp nacelles of the Dauntless will be very useful for an upgrade/refit of one of the many TOS/TMP kits I have (Phobos, Arethusa or Bonaventure).
Persevere tender refit: MVM nacelles 504
Bonaventure refit: MVM nacelles 503 with horizontal pylons to keep a low profile for a pathfinder vessel.
With 3 MVM nacelles of the MVM Cyclone and Enterprise V-shaped pylons you can make a nice frigate close to the kitbash from DS9 built from Excelsior/Ent B saucers. Imho these shorter nacelles will look better than long ones for a ship without secondary hull.
-saucer: the Dauntless's one
-secondary hull: sovereign
-warp: galaxy but rotated by 90°, warp pylons should be horizontal.
I don't know yet if I can sandwich the secondary hull of the Dauntless between the 2 halves of the sovereign's or If I must cut/saw it off.
Warp nacelles of the Dauntless will be very useful for an upgrade/refit of one of the many TOS/TMP kits I have (Phobos, Arethusa or Bonaventure).
Persevere tender refit: MVM nacelles 504
Bonaventure refit: MVM nacelles 503 with horizontal pylons to keep a low profile for a pathfinder vessel.
With 3 MVM nacelles of the MVM Cyclone and Enterprise V-shaped pylons you can make a nice frigate close to the kitbash from DS9 built from Excelsior/Ent B saucers. Imho these shorter nacelles will look better than long ones for a ship without secondary hull.
dJiPi the froggy
-
- Charismatic Commander
- Posts: 391
- Joined: Sun Jan 31, 2016 10:35 am
- Location: Paris, FRANCE
Re: Ideas & Projects for Federation Ships
Now If you are looking for a nice secondary hull : a Falcon F-16 fuselage. The air intake is perfect for a deflector array housing.
Want to build a twin booms ship like the Akira class or the NX : use the two halves of a Me 262
Want to build a twin booms ship like the Akira class or the NX : use the two halves of a Me 262
dJiPi the froggy
- RogueWolf
- Velutinous Vice Admiral
- Posts: 2872
- Joined: Sun Sep 30, 2012 3:49 pm
- Location: NL, Canada
-
- Charismatic Commander
- Posts: 391
- Joined: Sun Jan 31, 2016 10:35 am
- Location: Paris, FRANCE
Re: Ideas & Projects for Federation Ships
Very nice, looks like a fast ship. The "winglets" (triangle shapes) are similar to the modern extensions of the "actual" ships such as the sovereign class. A good refit for a old round saucer ship, I like it.
Maybe I should use this (or a similar airframe such as F-15, F-18, Mig-29, Su-27) for the Bradbury class to have parallel warp nacelles, just have to find the closest shape and .... scale ! My plastic kits dealer will go mad when I'll bring the sovereign saucer
Maybe I should use this (or a similar airframe such as F-15, F-18, Mig-29, Su-27) for the Bradbury class to have parallel warp nacelles, just have to find the closest shape and .... scale ! My plastic kits dealer will go mad when I'll bring the sovereign saucer
dJiPi the froggy
- Moongrim
- Fatidical Fleet Admiral
- Posts: 4962
- Joined: Tue Mar 12, 2013 9:36 pm
- Location: West of Eugene Oregon.
Re: Ideas & Projects for Federation Ships
Well this line of thought and concept looks promising...
There are Times, Sir, when men of good Conscience cannot blindly follow orders. You acknowledge their sentience, but ignore their personal liberties and freedoms. Order a man to hand over his child to the state? Not while I"m captain.
- J.L.Picard.
- J.L.Picard.
- Drop_Bear
- Crafty Commodore
- Posts: 1121
- Joined: Mon May 18, 2015 5:33 am
- Location: Doonan, Queensland, Australia
Re: Ideas & Projects for Federation Ships
Say! Those are some cool kitbash ideas, dJiPi. I am a massive fan of the Allegiance class (Odyssey is one of these); it's about time someone made a physical model!
"On the internet, no one knows you're a cat." - Intentional misquote of a popular adage.
My flikr gallery: https://www.flickr.com/photos/132558716@N02/albums
My flikr gallery: https://www.flickr.com/photos/132558716@N02/albums
- RogueWolf
- Velutinous Vice Admiral
- Posts: 2872
- Joined: Sun Sep 30, 2012 3:49 pm
- Location: NL, Canada
Re: Ideas & Projects for Federation Ships
I've always wanted to try an F-16 with the single air intake. I think it might work ok for a deflector dish housing.